Older jet ski with sun-bleached, peeling plastics tied up at a marina dock

Sea-Doo Graphic Kits

Sun, Salt Air and Dock Rash Took Your Sea-Doo’s Shine

It still fires up and pulls hard. But the plastics have gone chalky, the stripes are peeling, and at the dock it looks every one of its years.

Bring Back My Sea-Doo’s Shine
  • AMR Racing graphic kits
  • Made for your model and years
  • Free shipping on domestic orders over $99

The Problem

Every Summer Takes a Little More

Faded plastics don’t come back on their own. Each season adds to it.

The Sun Hits Twice

The sun beats down from above. The glare comes back up off the water. Every weekend on the lake, the color gets a little flatter.

Washing Doesn’t Fix It

You rinse it. You scrub it. It still looks chalky the minute it dries.

Old Decals Make It Worse

Half-gone stripes. Edges lifting and cracking. A tired factory decal looks worse than no decal at all.

The Line-Up at the Sandbar

You nose it up on the sand next to your friends’ skis. Theirs shine. Yours is the faded one at the end of the row. It keeps up with every one of them on the water. Parked, it looks like the old one.

Then the photos come out. Every shot from the day has your ski in it.

Rider beside a faded older jet ski at a sandbar, glancing at a row of glossy newer skis
Rider on a dock at dusk scrolling new watercraft on a phone, with a faded older jet ski tied up behind

The New-Ski Itch

So the thought creeps in at the end of the day: “Maybe I should just buy a new ski.” That means a new payment, a new ski to learn, and trading away the one you already know inside and out.

Your Sea-Doo doesn’t need replacing. It needs a new look.

See Kits for My Sea-Doo

The Fix

Sea-Doo Graphic Kits That Bring the Shine Back

An AMR Racing graphic kit made for your exact Sea-Doo model and years. It covers the tired plastics with fresh, bold color, and a scratch-proof clear laminate helps protect your plastics from the elements. Keep the ski you love. Change the way it looks.

Before: older jet ski with sun-bleached, peeling plastics at a marina dock Before
After: the same jet ski with a bold red, black and white graphic kit, looking new at the dock After
Same ski. Same dock. New graphics.
  • Looks New Again
  • Helps Protect Your Plastics
  • Made for Your Model and Years

Find your era, then your model. Tap a design to see it up close and order it.

1990s Classics

The skis that started it all. Still a blast, and still worth keeping.

2000s Sit-Downs

Big, fast, and built to last. They deserve to look like it.

The GTI Family, 2011-2019

One kit line for the GTI, GTR and GTS.

Spark

Small ski, loud look. The 2-Up and 3-Up each get their own kits.

Want to see them all? Browse every Sea-Doo graphic kit in the collection.

Find Your Hull and Years

Every kit is cut for one model and its years, so it lines up with your factory plastics. Find your ski in the table, then pick your look.

Sea-Doo graphic kits by model and years
ModelYearsReady-made designsCustom colors
GTS1992-199710Not offered
XP1994-199610Custom XP kit in your colors
GSX1996-199911Build a custom GSX kit
GTX1996-199928Not offered
RXP2004-201112Not offered
RXT2005-200920Not offered
GTI2006-201017Not offered
GTI / GTR / GTS2011-201922Custom GTI, GTR and GTS graphics
Spark 2-Up2014-20167Not offered
Spark 3-Up2015-201810Not offered

Kits fit the factory (OEM) plastics. It’s a graphic kit, not a full wrap, so pick a design color that looks great with your hull color.

AMR Racing Quality

Built Tough by AMR Racing

These are AMR Racing graphic kits. Each one is made to order for your model.

UV Inks That Won’t Fade

Bold color, up to 16.5 million shades, printed with UV-resistant inks guaranteed not to fade for up to 5 years.

Scratch-Proof Clear Laminate

The thickest layer of scratch-proof clear vinyl goes on top. It helps protect your plastics from the elements.

Genuine 3M Adhesive

It holds tight. Your graphics stay on until you decide to peel them off.

Covers Your Plastics

It’s a graphic kit, not a full wrap. Pick a color that works with your hull.

Pick a Design, or Mix Your Own Colors

Ready-Made Designs

The fastest way to a new look. Pick a finished design made for your Sea-Doo, then order.

Custom Kits

Own a GTI, GTR or GTS (2011-2019), an XP (1994-1996) or a GSX (1996-1999)? Choose any design, then pick the design color and the background color, and confirm your year.

See Custom Jet Ski Kits

Put It On at Home

No shop needed. Plan on about 4 hours.

  1. Pull the ski out of the water and scrub every panel. Remove all old adhesive.
  2. Wipe each panel down with rubbing alcohol.
  3. Lay each graphic from the center out. Use a heat gun on the curves.
  4. Let it dry at least 24 hours before you ride. 48 to 72 hours is even better.

Get ready with the graphic kit pre-install checklist, then follow the step-by-step graphic kit install guide.

The Designs That Started This Site

Since 2022, this site has shown four Sea-Doo designs. All four are still made today.

Sea-Doo XP with the Flashback graphic kit
XP Flashback
Sea-Doo GTS with the Carbon X Teal graphic kit
GTS Carbon X Teal
Sea-Doo GSX with the Mad Hatter Red graphic kit
GSX Mad Hatter Red
Sea-Doo GTI / GTR / GTS with the Widow Maker Green graphic kit
GTI / GTR / GTS Widow Maker Green

Like the Carbon X look on a GTS? It also comes as the Carbon X Red GTS kit. Mad Hatter comes in red, blue and Mad Hatter Yellow for the GSX. And Widow Maker for the newer GTI family also comes in Widow Maker Orange and Widow Maker Red GTI graphics.

Order With Confidence

  • Free Shipping On domestic orders over $99. Shipping policy
  • Price Match Find it lower? Ask for a price match.
  • Real People Questions about fit? Call toll free 888-859-6359.

Questions Before You Order

Will it fit my Sea-Doo?

Yes, if your model and years match the table above. Kits are made for the factory (OEM) plastics, so aftermarket panels may not line up.

Is it a full wrap?

No. It covers the plastic panels. Pick a design color that looks great with your hull.

Will it fade like my old decals?

The UV-resistant inks are guaranteed not to fade for up to 5 years, under a scratch-proof clear laminate.

Can I put it on myself?

Yes. Plan on about 4 hours with rubbing alcohol and a heat gun, then let it dry at least 24 hours before you ride.

Can I pick my own colors?

For the GTI / GTR / GTS (2011-2019), XP (1994-1996) and GSX (1996-1999), yes. A custom kit lets you choose the design, the design color and the background color.

Who makes these kits?

They are AMR Racing graphic kits, made to order for your Sea-Doo model.

Keep the Ski. Lose the Faded Look.

Same Sea-Doo you trust. Fresh color for the next weekend at the sandbar.

Find My Sea-Doo Kit

Bring back your Sea-Doo’s shine

Shop Sea-Doo Kits